• Using the Uconnect® Access App from a compatible
smartphone
• From the Mopar Owner Connect website
(
moparownerconnect.com
)
• Contacting Uconnect® Care
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to turn on the horn and lights.
How It Works
1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and pass-
word.
2. To turn on the horn and lights, press the “trumpet
icon.” To turn-off the horn and lights, press the
“trumpet icon” again.
3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
4. The Uconnect® Access App will confirm if your
command was sent (or not). Press “OK” to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
2
ALL ABOUT Uconnect® ACCESS 115
To Next Page
Loading...
