Voice Texting allows you to compose a new text or reply
to an incoming text message. Before you attempt to use
the Voice Texting feature, check to ensure you have the
following:
1. A Paired, Bluetooth enabled phone with the Message
Access Profile (MAP). Not all Bluetooth enabled
phones support MAP. Visit
UconnectPhone.com
for
system and device compatibility information.
2. An active Uconnect Access trial or paid subscription.
Press the “Apps
” button on the touchscreen to
begin the registration process.
3. Accept the Allow MAP profile request on your smart
phone. (Please refer to device manufacturer instruc-
tions for details).
To Send A Text Message:
1. Push the Uconnect Phone button.
2. Wait for the beep.
3. Say “Text.”
4. Uconnect will prompt you “Say the phone number, or
full name and phone type of the contact you want to
send a message to.”
5. Wait for the beep and say a contact that is in your
phonebook, or a mobile phone number that you
would like to send the message to.
6. Uconnect will prompt you “Please say the message
that you would like to send” (If you do not hear this
prompt, you may not have an active subscription with
Uconnect Access).
7. Wait for the beep, and then dictate any message up to
140 characters. If you exceed 140 characters, you will
hear the following prompt: “Message was too long;
your message will be truncated.”
4
UCONNECT 8.4A/8.4AN 149
To Next Page
Loading...