NOTE: Certain high-end video games will exceed the
power limit of the vehicle’s Power Inverter. Refer to
“Power Inverter” in “Getting To Know Your Vehicle” in
this guide for further information.
Headphones Operation
The headphones receive two separate channels of audio
using an infrared transmitter from the video screen.
If no audio is heard after increasing the volume control,
verify that the screen is turned on, the channel is not
muted and the headphone channel selector button is on
the desired channel. If audio is still not heard, check that
fully charged AAA batteries are installed in the head-
phones.
The headphone power indicator and controls are located
on the right ear cup.
1 — Power ON/OFF Button
2 — Volume Control
3 — Channel Selection Button
4
UCONNECT 8.4A/8.4AN 231
To Next Page
Loading...