8. Uconnect will then repeat the message back to you.
9.
Uconnect will prompt you: To add to your message, say
“Continue”; to delete the current message and start over,
say “Start Over”; to send the current message, say
“Send”; to hear the message again, say “Repeat.”
10. If you are happy with your message and would like
to send it, wait for the beep and say “Send.”
11. Uconnect will then say “Sending your message.”
Sample Commands for Voice Text Reply and Voice Texting
Example Command Action
“Text John Smith” Send a message to specific contact in address book
“Text 123 - 456 - 7890” Send 123 - 456 - 7890 a message from your phonebook
“Show messages” See recent text messages listed by number on
Uconnect screen
“Listen to/view (message number four, for example)” Hear messages or read it on Uconnect screen
“Reply” Send a voice text reply to a current message
“Forward text/message to John Smith”
Forward current text to specific contact in address book
“Forward text/message to 123 - 456 - 7890” Forward current text to specific phone number
150 UCONNECT 8.4A/8.4AN
To Next Page
Loading...