• Using the Uconnect Access App from a compatible
device
• From the Mopar Owner Connect website
(
moparownerconnect.com
)
• Contacting Uconnect Care
If you want, you can set up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to lock or unlock your doors.
How It Works
Uconnect Access App:
1. Download the Uconnect Access App to a compatible
device and login using your username and password.
2. To lock the doors, push the button with the closed lock
icon; to unlock the driver’s door push the button with
the open lock icon.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4-digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect Access App will confirm if your com-
mand was sent (or not). Press “OK” to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions.
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
56 ALL ABOUT UCONNECT ACCESS
To Next Page
Loading...