3. Beneath the image of a vehicle like yours, you will see
a row of icons. To start the engine, press the “circular
arrow”, to turn-off an engine that has been remote
started press the “cancel” button.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when
your registered your Uconnect Access system). Please
enter your Uconnect Security PIN.
5. A message will appear on the screen to let you know
if the command was received by your vehicle.
Uconnect Care:
1. If you need to unlock the doors of your vehicle,
contact Uconnect Care by calling:
855-792-4241
NOTE: The Uconnect Care Agents are trained to help you
with unlocking of your door (for example, in an acciden-
tal lock-out). All other Remote Services should be per-
formed via the Mopar Owner Connect website
(
moparownerconnect.com
) or through the Uconnect Ac-
cess App on your compatible device.
2. For security purposes, the Uconnect Care Agent will
verify your identity by asking for your 4-digit
Uconnect Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
62 ALL ABOUT UCONNECT ACCESS
To Next Page
Loading...