UFactory LITE 6 User Manual

below). When running the program, you can observe the motion posture of
the robotic arm in real time.
Note: When the robotic arm is in the simulation mode, you can also run
the Blockly motion program to observe the motion of the virtual robotic
arm.
1.6.2 Blockly Workspace
Drag the code block into the action panel, the code execution is top-down,
users can drag and drop the code block with the blocks attached from
behind together.
【 】Return to the default size and code block at centered position

UFactory LITE 6 Specifications

General

Brand	UFactory
Model	LITE 6
Category	Robotics
Language	English