UFactory LITE 6 User Manual

Appendix6-Product Information
1.1 Product Mark
Robotic Arm
1.2 Use Environment
 Low humidity (25%-85% non-condensing)
 Altitude: <2000m
 Ambient temperature: 0°C ~ 50°C
 Avoid direct sunlight (indoor use)
 No corrosive gas or liquid.
 No flammable materials.
 No oil mists.
 No salt sprays.
 No dust or metal powder.
 No mechanical shock, vibration.
 No electromagnetic noise.

No radioactive materials.
1.3 Transport, Storage and Handling
 Move the robot to the zero position by UFACTORY Studio, then put
the lite 6 robot and Control Box in the original packaging.
 Transport the robot in the original packaging.
 Lift both tubes of the robot arm at the same time when moving it
from the packaging to the installation place. Hold the robot in
place until all mounting bolts are securely tightened at the base
of the robot.
 The controller box shall be lifted by the handle.
 Save the packaging material in a dry place, you may need to pack
down and move the robot in the future.

UFactory LITE 6 Specifications

General

Brand	UFactory
Model	LITE 6
Category	Robotics
Language	English