1.5 Live Control
1.5.1 Status Bar
The "unconnected robotic arm" indicates that the robotic arm is not
connected. Please reconnect the robotic arm on the homepage. If it is not
connected, please check if the robotic arm is normally turned on and
check if the network connection is normal.
The “Simulate Robot” indicates that the robotic arm is connected and is
currently in simulation mode. In this mode only, the joint motion of the
simulated robotic arm can be controlled by the live control panel.
The “Real Robot” indicates that the robotic arm is connected. It is
currently a real robotic arm, and all control functions on the live
control panel are available.
1.5.2 Emergency Stop
To Next Page
Loading...
