connect the robotic arm.
Note:
1. If you do not unplug the cable connecting RI0 and GND, the next time
you restart the control box, no matter what IP address you modify, the IP
address of the control box will be automatically changed to 192.168.1.111,
so after modifying the IP, Be sure to unplug the cable connecting RI0 and
GND.
1.4.10.4 Log
The error log of the control box, servo error log and end effector error
log can be checked.
Click the 【Download】button to download the error log.
To Next Page
Loading...
