UFactory LITE 6 User Manual

1.6.6 GPIO（Control Box and End tool interface）
The IO interface is made up of a controller interface and an end tool
interface, which can be used to acquire, set, and monitor IO interface
operations. The controller has 8 digital input interfaces, 8 digital
output interfaces, 2 analog input interfaces, and 2 analog output
interfaces. The end tool has 2 digital input interfaces and 2 digital
output interfaces. 2 analog input interfaces. The control box digital IO

UFactory LITE 6 Specifications

General

Brand	UFactory
Model	LITE 6
Category	Robotics
Language	English