UFactory LITE 6 User Manual

192.168.1.*, check if the network proxy is enabled, and check if the
robotic arm’s IP address conflicts with that of other devices in the LAN.
Please change the computer IP address to the same network segment and
close the computer's network proxy. To test whether the computer can
communicate with the robotic arm, open the command terminal and input
‘ping 192.168.1.* (the IP address of the robotic arm)’. If the ping is
working, the communication between the computer and the robotic arm is
successful.

UFactory LITE 6 Specifications

General

Brand	UFactory
Model	LITE 6
Category	Robotics
Language	English