situation.
1.4.1 Motion Settings
1.4.1.1 Linear Motion
Acceleration: The acceleration of linear motion. The larger the value,
the less time it takes to reach the set speed. It is
recommended to be set within 20 times the maximum speed value
for a smooth trajectory.
Position step: Set the step length for fine cartesian position (X/Y/Z)
adjustment in Live-control.
Attitude step: Set the step length for fine adjustment of TCP orientation
in Live-control.
1.4.1.2 Joint Motion
Acceleration: The acceleration of joint motion. The larger the value, the
less time it takes to reach the set speed. The range is
recommended to be within 20 times the maximum operating speed
[20*180°/s].
To Next Page
Loading...
