ULTIMAKER METHOD XL MANUAL PAGE 6
SAFETY INFORMATION
This guide contains warnings and safety notices.
Provides additional information that is helpful to do a task or to avoid problems
Warns of a situation that may cause material damage or injuries if the safety instructions are
not followed
The following ISO warning symbols are also used:
Magnetic eld (ISO 7010-W006)
Electricity hazard (ISO 7010-W012)
Hot surface (ISO 7010-W017)
Crushing of hands (ISO 7010-W024)
Pinching and entanglement hazard
Read the original instructions (ISO 7010-M002). Before using this product, read the complete
original instructions to learn about all product features and safety related information
To Next Page
Loading...
