Ultimaker S3 Quick Start Guide

Quick
start
guide
Ultimaker
S3
EN
CS
DA
DE
ES
FI
FR
IT
HU
JA
KR
NL
NO
PL
PT
RU
SV
TR
ZH-S
ZH-T
AR
Scan here to register your product
It takes 60 seconds to conrm ownership of you new
Ultimaker product. You will gain full access to a more
streamlined experience, plus important updates and
service information.

Ultimaker S3 Specifications

General

Build Volume	230 x 190 x 200 mm
Print Technology	Fused Filament Fabrication (FFF)
Filament Diameter	2.85 mm
Number of Print Heads	2
Print Speed	Up to 24 mm³/s
Heated Bed	Yes
Dual Extrusion	Yes
Operating Temperature	15 - 32 °C
Nozzle Diameter	0.4 mm
Connectivity	Wi-Fi, USB, Ethernet
Supported Materials	PLA, ABS, Nylon, CPE, PC, TPU, PP, PVA, Breakaway
Touchscreen	Yes
Feeder Type	Dual-geared feeder
Build Plate	Glass
Bed Leveling	Automatic
Power Requirements	100-240 V, 50-60 Hz
Layer Resolution	20 - 200 microns (0.0007 - 0.008 inches)