To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Ultimaker S5 and is the answer not in the manual?
General| Build Volume | 330 x 240 x 300 mm |
|---|---|
| Layer Resolution | 20 - 600 microns |
| Filament Diameter | 2.85 mm |
| Max Nozzle Temperature | 280 °C |
| Max Build Plate Temperature | 140 °C |
| Print Technology | Fused Filament Fabrication (FFF) |
| Number of Print Heads | 2 |
| Build Plate | Heated glass build plate |
| Operating Sound | 50 dBA |
| Print Speed | Up to 24 mm³/s |
| Display | 4.7-inch color touchscreen |
| Operating Temperature | 15 - 32 °C |
| Nozzle Diameter | 0.25, 0.4, 0.6, 0.8 mm |
| Connectivity | Ethernet, Wi-Fi, USB |
| Supported Materials | PLA, ABS, Nylon, CPE, PVA, TPU 95A, PC, PP |
| Dimensions | 495 x 585 x 780 mm |
| Feeder Type | Dual-geared |
| Print Head Movement Speed | 300 mm/s |
| Build Plate Heating Time | Less than 4 minutes |
| Power Consumption | 350 W |
| Travel Speed | 300 mm/s |
| Operating Humidity | 20 - 80% (non-condensing) |
