UT3200 Series User Manual
26
3. Use Function button to choose
Turn off time period per file function
After collecting 10 minute, it will create a
new file and save it automatically
After collecting 20 minute, it will create a
new file and save it automatically
After collecting 30 minute, it will create a
new file and save it automatically
After collecting 1 hour, it will create a new
file and save it automatically
6.1.6 DELAY – record time interval
USB record time interval can set 1s, 5s, 10s, 20s, 1min, 2min, 5min, 10min, 20min, 30min, 1h
Steps：
1. Press Setup enter Setup page
2. Move the cursor key to turn off TIME PERIOD PER FILE
3. Move the cursor key to DELAY then use Function button to set time interval
6.2 Channel set page
This page can set channel’s model name, the low and high temperature limit. It is related to 4
3.2 section Histogram mode and 5.2 section Comparator
6.3 GUEST CAL
This page is used to adjust abnormal temperature. User can input actual temperature
to amend.
To Next Page
Loading...
Need help?
General
