UT3200 Series User Manual
30
If you use opto-isolator, please choose
9600 baud rate
If you use computer communicate with
Instrument, please choose 115200 high-
speed baud rate
7.2 System information
MODEL, SENSOR, CHAN AMOUNT, SW VERSION, SERIAL NO.
7.3 System service
Warning: This function is use to calibration data before out of factory. Non-
professionals cannot enter by force. Otherwise the data may lost, resulting in large
deviation of measurement data.
8. FILE
8.1 File page
Press Setup shortcut to enter Setup page, use Function button to enter FILE page
Figure 8-1-1 File
To Next Page
Loading...
Need help?
General
