UNI-T UT70C User Manual

1. Press RANGE.
The Meter enters the manual range mode and
turns off.
Each presses of RANGE increments the range.
When the highest range is reached, the Meter
wraps to the lowest range.
2. To exit the manual range mode, press and hold
RANGE for over one second.
The Meter returns to the autorange mode and
is displayed.
Note
l In Hold and MAX MIN mode, press RANGE exits
these measurement modes and enters manual
range mode.
l In Hz measurement mode, press RANGE to attenuate
10 times of input signal amplitude which can increase
the Meter sensitivity and stabilize the correct reading.
Measurement Ranges (2)
Model UT70C: OPERATING MANUAL
15

UNI-T UT70C Specifications

General

Brand	UNI-T
Model	UT70C
Category	Multimeter
Language	English