13
Model UT805: OPERATING MANUAL
MAX MIN
STO and
RCL
HOLD
Button
Press MAX MIN to select the maximum and minimum value.
HOLD has two features:
1. Data Holding
2. Exit STO, RCL and MAX MIN mode.
Operation Performed
l
l
Press STO to store the reading.
Press RCL to recall the stored reading.
Press HOLD to enter Hold mode, the VFD display
Press HOLD again to exit Hold mode, the disappear.
l
l
l
Press HOLD to exit STO, RCL and MAX MIN mode when the Meter is at STO, RCL and MAX
MIN measurement mode.
To Next Page
Loading...
Need help?
General
