UTD1000 User Manual
Figure 5-10
6.During upgrade, if the system reads that the format of
the program upgrade pack document is different from
that of the Oscilloscope, the prompt in Figure 5-11 will
appear : “E27:Sorry, the package format isn’t correct!
Please pull out U-disk and reboot.”
7.If the model of the program upgrade pack is
incompatible with the Oscilloscope, the prompt in Figure
5-12 will appear : “E23 : The package’s model No. isn’t
same with this DSO! Please read user manual, get
system information in detail. Please pull out U-disk and
reboot.”
Figure 5-11
To Next Page
Loading...
