UTD1000 User Manual
8.If the hardware version of the program upgrade pack
is incompatible with the Oscilloscope, the prompt in
Figure 5-13 will appear : “E24 : The package’s hardware
Ver. isn’t same with this DSO! Please read user manual,
get system information in detail. Please pull out U-disk
and reboot.”
Figure 5-12 Figure 5-13
9.If the software version of the upgrade document is
lower than that of the Oscilloscope, the prompt in Figure
5-14 will appear “E26: Sorry, this package’s version is
too low to update. Please read user manual, get system
information in detail. Please pull out U-disk and reboot.”
To Next Page
Loading...
