32
7- CLEANING & MAINTENANCE
►Cleaning external outlets / housing
It is advisable to disassemble the coffee and milk outlets daily for thorough
cleaning.
♦ Coffee outlet
1. Slide the coffee spout(s) down
2. Pull the spout towards you to remove
3. Clean the spout(s) under a tap or directly in a dishwasher
4. Replace the spout(s) on the machine
♦ Cappuccino outlet
1. Slide the coffee spout(s) down
2. Pull the spout towards you to remove
3. Remove the cappuccino foamer head by turning the assembly to the right
and pulling down
4. Separately disassemble each part for individual cleaning, including the
silicone suction tube.
5. Reassemble.
♦ Steam wand
After each use, wipe the steam tube with a damp cloth and briey tap the steam
button to purge the small quantity of milk remaining inside the tube.
Disassemble the steam outlet nozzle for easier cleaning.
♦ Drip tray
Remove the drip tray by sliding the frame forward and lifting the grate out. Clean
the grate using a sponge.
♦ Housing
Use a soft cloth and alcohol for the stainless steel parts, and non-abrasive detergent for the painted parts.
The grounds drawer is entirely in stainless steel, it can be easily cleaned with water. Take care not to scratch
the painted parts.
To Next Page
Loading...
Need help?
General
