UniCarriers 1F2 - Main Terms Used in this Section; Safety Rules and Practices

133
Shift to right. Shift to left.
MAIN TERMS USED IN THIS SECTION
Shift: To move the forks or load to the right or the left.
Side Shift Stroke: The maximum distance the forks or load can travel
to the right or the left.
Shift Finger Bar: An oblong board on which the forks and the
backrest are mounted. This shift nger bar shifts (moves) to the right
and left.
Attachment: Equipment or parts to be added or replaced with
the loading/unloading devices to perform a variety of loading and
unloading.
SAFETY RULES AND PRACTICES
WARNING
!
• Do not make sudden and quick shifts with the forks loaded
or raised.
If you make sudden shifts with the forks loaded, there is a risk of a load
collapse. This can cause the lift truck to become unstable and possibly
tip over.
WARNING
!
• Only operate the side shift when entering or placing a load to
correct position before lowering.
• Never operate side shift during travel.
• Never operate side shift during lifting or lowering.