UniCarriers FRSB14-8 - Page 100

PREOPERAPREOPERATIONAL TIONAL CHECKSCHECKS
4-64-6
The following checks should be made from The following checks should be made from the operator’s seat.the operator’s seat.
Sit in the Sit in the operator’s seat properly and perform the following checks:operator’s seat properly and perform the following checks:
33
3 3 : : STEERING STEERING WHEELWHEEL
44
55
4 4 : : LIGHTING LIGHTING SWITCHSWITCH
5 5 : : HORN HORN SWITCHSWITCH
11
22
1 1 : : OPERATOR’S OPERATOR’S SEATSEAT
2 2 : : SEAT SEAT BELTBELT
1414
 POSITIOPOSITION N OF OF OPERATOR’S OPERATOR’S SEAT SEAT ANDAND
STEERING COLUMNSTEERING COLUMN
Sit in the operator’s seat and adjust the seat to aSit in the operator’s seat and adjust the seat to a
position which allows you to press the pedals position which allows you to press the pedals completelycompletely
and operate the steering wheel smoothly. Lock the seatand operate the steering wheel smoothly. Lock the seat
and the and the steering column securely.steering column securely.
1515
 SEAT SEAT BELTBELT
Check that the seat belt:Check that the seat belt:
••
 strap is strap is not broken not broken or wornor worn
••
 anchorages to make sure anchorages to make sure they are not corroded andthey are not corroded and
securely attached to the vehicle framesecurely attached to the vehicle frame
•• tongue and the buckle tongue and the buckle are not damaged are not damaged and can beand can be
engaged and disengaged properlyengaged and disengaged properly
•• webbing does webbing does not have not have frayed stitchingfrayed stitching
Turn the key switch to “ON”.Turn the key switch to “ON”.
NOTENOTE
Make sure the brake pedal is released when turningMake sure the brake pedal is released when turning
the key switch to “ON”.the key switch to “ON”.
1616
 STEERING STEERING WHEELWHEEL
Turn the steering wheel counterclockwise and Turn the steering wheel counterclockwise and clockwiseclockwise
to check if it turns smoothly without binding.to check if it turns smoothly without binding.
Check also that it does not have vertical looseness.Check also that it does not have vertical looseness.
1717  INSTRUMEINSTRUMENT NT PPANELANEL
Make sure that all items are displayed on the instrumentMake sure that all items are displayed on the instrument
panel when the key switch is turned panel when the key switch is turned to the “ON” position.to the “ON” position.
1818
 HORN HORN
Press the horn switch to check that the horn soundsPress the horn switch to check that the horn sounds
properly.properly.

https://www.forkliftpdfmanuals.com/