INSPECTION AND SERVICEINSPECTION AND SERVICE
1-291-29
WARNINGWARNING
■■ When working in a group, have aWhen working in a group, have a
designated leader and follow hisdesignated leader and follow his
instructionsinstructions
■■
Turn the key switch offTurn the key switch off
Make sur e to turn the key sw itc h off andMak e sure to tur n the key switch off and
disconnect the battery connectors.disconnect the battery connectors.
■■ Unless otherwise specied, the keyUnless otherwise specied, the key
switch must be offswitch must be off
The truck is to be parked with the key switch off,The truck is to be parked with the key switch off,
and battery connectors disconnected unless theand battery connectors disconnected unless the
conditions require otherwise.conditions require otherwise.
■■ Before starting inspection orBefore starting inspection or
maintenance, place all load handlingmaintenance, place all load handling
levers in neutrallevers in neutral
■■
Make sure the forks and otherMake sure the forks and other
attachments (if any) are on the groundattachments (if any) are on the ground
■■ If it is unavoidable to work underIf it is unavoidable to work under
raised forks or attachments, use araised forks or attachments, use a
stable support under the inner maststable support under the inner mast
and/or the carriage to prevent theand/or the carriage to prevent the
forks or attachment from falling downforks or attachment from falling down
unexpectedlyunexpectedly
■■ Do not put your feet under the forksDo not put your feet under the forks
■■ Use caution to avoid getting Use caution to avoid getting youryour
ngers pinchedngers pinched
Be careful so as not to get your fingers caughtBe careful so as not to get your fingers caught
when opening or closing the doors.when opening or closing the doors.
■■ Use caution when making checks inUse caution when making checks in
elevated locationselevated locations
Do not climb on the truck frame to inspect orDo not climb on the truck frame to inspect or
service the truck. If you must climb up on theservice the truck. If you must climb up on the
truck, wear a hard hat and be careful not to fall.truck, wear a hard hat and be careful not to fall.
When making checks or performing servicing inWhen making checks or performing servicing in
an elevated location, use an appropriate step stoolan elevated location, use an appropriate step stool
or work platform and wear a hard hat, a safety beltor work platform and wear a hard hat, a safety belt
and a safety rope.and a safety rope.
■■ Do not use the mast as a ladder:Do not use the mast as a ladder:
•• W h e n c a r r y i n g o u t c h e c k s o r m a k i n g W h e n c a r r y i n g o u t c h e c k s o r m a k i n g
adjustments, do not use the connecting memberadjustments, do not use the connecting member
or load backrest as a ladder. The mast canor load backrest as a ladder. The mast can
move unexpectedly, pinching or cutting yourmove unexpectedly, pinching or cutting your
hands or feet.hands or feet.
••
Do not use the mast as a ladderDo not use the mast as a ladder. Y. You might fallou might fall
from the mast, experiencing a serious accident.from the mast, experiencing a serious accident.
■■ Make sure the battery connectors areMake sure the battery connectors are
disconnected before working on thedisconnected before working on the
rotating partsrotating parts
Use due caution when working on rotating parts toUse due caution when working on rotating parts to
avoid getting your body entangled in them. Beforeavoid getting your body entangled in them. Before
checking a rotating part, make sure to turn the keychecking a rotating part, make sure to turn the key
switch off and disconnect the battery connectors.switch off and disconnect the battery connectors.
Do not bring something near the rotating parts.Do not bring something near the rotating parts.
To Next Page
Loading...
