[30]
Customizing Your Phone
Changing the Handset Banner
[menu/clear]
[select/ ]
Each handset will display a banner name once it is registered to the
base. The default banner is Handset #1, Handset #2, etc. You can
change the name your phone displays by changing the banner display.
If you have more than one handset, the banner name identifies your
handset during handset-to-handset functions like intercom and
DirectLink communication. The name will be displayed on the LCD
screen during Standby, Intercom, Intercom Hold, Room/Baby Monitor,
and Copy Phonebook operations. The banner name will be displayed
on the receiving handset as well.
1. Press .
2. Select the HANDSET SETUP menu, and then the BANNER submenu.
3. Use the keypad to enter or edit the banner name. (See
on page 12 for detailed instructions on entering text.)
4. Press . You will hear a confirmation tone.
Entering Text
from Your Handset
To Next Page
Loading...
Need help?
General
