[40]
Transferring a Call
Answering a Transferred Call
You can transfer a call from one station to another.
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging.
To accept the call transfer:
1. Press or from the handset or or on the base.
2. To speak to the caller, press on the receiving handset or on the base.
3. Only the first station to answer the transfer page will be connected to the call. If the transfer page is not picked
up within one minute, the operation will be canceled.
[ /flash] [xfer/intercom] [int'com/xfer] [speaker]
[ /flash] [speaker]
To Next Page
Loading...
Need help?
General
