11
POWER On/Off
Turn the unit On by rotating the PWR/VOL
control clockwise.
Adjust the volume to a comfortable level.
When you turn the unit On, you will hear a
beep, and the greeting message below
appears on the LCD for 3 seconds.
Note: When you turn On the radio for the first time after purchase,
the channel 16 will appear on the LCD.
Operation
Last Channel Memory
The OCEANUS DSC memorizes the last channel selected before you
turn Off the radio. For example, if you turn Off the radio on CH 12, it will
be on that channel when turned back On.
Note: In order for the last channel to be memorized, you must have
the radio on that channel for 3 seconds.
UT01910ZZ_0 9/18/03 5:37 PM Page 11
To Next Page
Loading...
Need help?
General
