Uniden OCEANUS DSC Series User Manual

48
2-H. GROUP MMSI
1. Press SELECT at
SETUP (To enter
SETUP, see page 30).
2. Display
GROUP MMSI using CH ▲
and ▼.
3. Press SELECT. The group MMSI ID
screen appears.
4. You can now enter the GROUP MMSI
code. Press CH ▲ to increase the
number, CH ▼ to decrease. The number
will be entered when SELECT is
pressed, and the blinking digit moves to
the right.
5. After the final digit is entered, a
confirmation screen appears. Press
SELECT and the radio returns to the
following screen.
UT01910ZZ_0 9/18/03 5:37 PM Page 48

Uniden OCEANUS DSC Series Specifications

General

Brand	Uniden
Model	OCEANUS DSC Series
Category	Marine Radio
Language	English