Uniden OCEANUS DSC Series User Manual

26
2. Press CH ▼ four times to select
POS SEND.
3. Press SELECT. The individual directory
appears.
4. Press SELECT to send your position
information.
1-E. POSITION SEND
This radio has the ability to send the position of your vessel to another
vessel using a VHF marine radio equipped with DSC.
Note: Position send is only available when it is connected to the
GPS.
1. Press SELECT at
DSC CALL (To enter
DSC CALL, see page 21).
INDIVIDUAL appears.
5. The following screen appears.
UT01910ZZ_0 9/18/03 5:37 PM Page 26

Uniden OCEANUS DSC Series Specifications

General

Brand	Uniden
Model	OCEANUS DSC Series
Category	Marine Radio
Language	English