6. Select AM or PM using CH ▲ or ▼, then
press SELECT.
7. A confirmation screen appears.
31
2-A-2. ALARM ON
This feature allows you to turn the alarm ON.
1. Press
SELECT at
SETUP (To enter
SETUP, see page 30).
2.
ALARM CLOCK appears. Then, press
SELECT.
3. Press SELECT again.
4. Select
On. Using CH ▲ or ▼, and press
SELECT. The radio returns to the
channel display screen and the icon
appears.
5. When the radio reaches the set time the
alarm sounds and the icon blinks.
Note: The alarm sounds when the set time is reached, you can turn
the alarm Off by pressing any key. Alarm mode will turn Off
automatically once the alarm sounds.
UT01910ZZ_0 9/18/03 5:37 PM Page 31
To Next Page
Loading...
Need help?
General
