38
1. Press SELECT at the code that you
want to edit.
2.
EDIT appears, then press SELECT.
3. You can now edit the FIPS code. Press
CH ▲ increase the number, CH ▼ to
decrease. The number will be entered
when SELECT is pressed, and the
blinking digit moves to the right.
2-C-2. EDIT
If you want to edit the FIPS code
1. Press SELECT at
NEW. The registering
screen appears.
2. You can now enter the new FIPS code.
Press CH ▲ to increase the number,
CH ▲ to decrease. The number will be
entered when SELECT is pressed, and
the blinking digit moves to the right.
When you finish entering the last digit,
the radio returns to
NEW screen.
2-C-1. NEW
If you want to register a new FIPS code
UT01910ZZ_0 9/18/03 5:37 PM Page 38
To Next Page
Loading...
Need help?
General
