Uniden UM725GBT User Manual

E-39
Uniden UM725 Radio Owner’s Manual
TO SET UP A ROUTE:
1. Press the MENU button, and then use the PUSH/SEL knob to access the
WAYPOINT SETUP menu.
2. Use the PUSH/SEL knob to s elect ROUTING METHOD and
press SELECT. If set to AUTO, the screen automatically
changes to the next destination. If set to MANUAL,
navigation will not start until you press NEXT.
3. Select ROUTE DIRECTORY and press SELECT. The Route
Directory screen displays a list of available routes.
4. Use the PUSH/SEL knob to select a route and press EDIT.
NAME and LIST appear on the screen .
5. Use the PUSH/SEL knob to select NAME and press
SELECT . The pop-up keyboard appears.
6. Enter a name for the waypoint. When done, press FINISH .
NAME and LIST appear on the screen again.
7. Select LIST and press SELECT , The Rout List screen
appears.
8. Press the ADD soft key. The Point List screen appears with
a list of saved waypoints.
9. To add a waypoint, use the PUSH/SEL knob to select the
waypoint and press ADD.
10. Repeat step 8-9 for each waypoint you want to add to the
route.
11. Press BACK to exit .
Note: The Waypoint selected for the 01 posion will be the rst point to which your radio will
navigate. When you reach that waypoint, the radio will navigate to the next waypoint
(02), and connue through the list of waypoints.
Note: These sengs cannot be set or changed during navigaon. To make any changes, rst exit
navigaon mode.
UM725GBT
UM725GBT
UM725GBT
UM725GBT

Uniden UM725GBT Specifications

General

Brand	Uniden
Model	UM725GBT
Category	Marine Radio
Language	English