E-40
Uniden UM725 Radio Owner’s Manual
ACCESSING NAVIGATION
When you press the NAVI soft key and the following two menus will appear.
x WAYPOINT DIRECTORY – Displays your waypoint directory for access or editing.
This list also includes information saved by MOB and MK POS keys (MOB appears as
MOB 001, 002… MK POS appears as MARK 001, 002… if they were saved without
being edited.)
x ROUTE DIRECTORY – Displays your route directory for access or editing.
TO START WAYPOINT NAVIGATION.
1. Select WAYPOINT. The WAYPOINT DIRECTORY
appears.
2. Select the desired waypoint and press the GOTO soft
key to start navigating to your destination.
3. As you navigate, the screen displays your position
information.
4. When you arrive at destination, an arrival message will
be displayed and the arrival alert will sound. You can
select whether to continue or end navigation by pressing
the END or CLEAR soft keys.
If you press the CLEAR soft key, navigation will continue,
and once you go out of range and return to the range, the
arrival message will be displayed and arrival alert will sound
again.
UM725GBT
UM725GBT
UM725GBT
UM725GBT
UM725GBT
Note: You can stop navigaon anyme by pressing the CLEAR buon.
Note: Navigaon cannot be started without the locaon informaon from GPS. You can operate
radio during navigaon, but you cannot edit or change locaon informaon (desnaon
or route) during navigaon.
To Next Page
Loading...
Need help?
General
