Making calls 19
Call waiting
During a call, a call waiting tone indicates another caller. If the number is being transferred, you you see the
number or the name of the caller on the display.
Once you have accepted the waiting call, you can switch between the two parties (Call Swap) or speak to
them both at the same time (Conference).
Prevent/permit call waiting
¤ . . . Use to select Select Services OK Call Waiting OK
Do not put through call
When you do not want to be disturbed, you can arrange for no more calls to be put through.
¤ . . . Use to select Select Services OK Do Not Disturb OK
Cancelling ringback
After you have initiated a ringback, you can cancel it before the other party calls back.
¤ . . . Use to select Select Services OK Ringback Off OK . . . You receive a
confirmation from the phone network Press the End call key
Reject waiting caller: ¤ Reject . . . The waiting caller hears the busy tone
Accepting a call: ¤ Accept
Enable/disable: ¤ Status: . . . Use to select On or Off
Enable: ¤ Send
Enable/disable:
¤ Status: . . . Use to select On or Off
Enable: ¤ Send
You can only activate one ringback at a time. Activating a ringback will automatically
cancel any ringback that is already active.
If the ringback is indicated before you are able to cancel it: Press the End call
key
To Next Page
Loading...
Need help?
General