Unify OpenScape SL6

60 Team functions
Team functions
Activating/deactivating group calls
If this has been configured by the service engineer, you belong to one or more
groups of internal users that can be reached at a hunt group or group call
phone number. Calls are signaled on all telephones in the group either in
succession (=hunt group) or simultaneously (=group call), until a member of the
group answers the call. Every user in the group can also remain available
under his own phone number.
You can leave and re-join specific groups or leave and re-join all groups.
These functions can also be called directly by entering the relevant code
 page 40.
You belong to a hunt group or group call group
Use this function to leave or re-join the hunt group or group.
Press and hold down the Talk key.
Open the system menu.
Either:
s t w Select the menu item and confirm. You have now left the hunt group or group.
Or:
s t w Select the menu item and confirm. You have now re-joined the hunt group or
group.
then:
a Press the End call key to end the operation.
Menu
Leave hunt group?
Join hunt group?