Unify OpenStage 40 T User Manual

Enhanced phone functions 57
Parking a call
You can park up to ten calls, either internal, external, or both. Parked calls can
be displayed on and picked up from another telephone. This feature is useful if
you want to continue a call at another phone.
Prerequisite: You are conducting a call.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
Select and confirm the option shown.
0 ... 9 Enter the number of the park slot (0 - 9) and make a note of it. If the park slot
number you entered is not displayed, it is already in use; enter another one.
Retrieving a parked call
Prerequisite: One or more calls have been parked. The phone is idle.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
Select and confirm the option shown
1
.
0 ... 9 Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you cannot retrieve the call.
Calls g
Park a call
Calls g
Retrieve call
1. ”Differing display view in a HiPath 4000 environment”  Seite 113
If a parked call is not picked up, after a specific period of time the call is re-
turned to the telephone from where it was parked (recall).

Unify OpenStage 40 T Specifications

General

Speakerphone	Yes
Base station keys	12
Mac compatibility	No
Display diagonal	5.1 \
Display resolution	240 x 128 pixels
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Blue