Unigas G400A - Block 600: Actuators (Continued); Analog Output and Actuator Settings

30
645
Configurazione uscita analogica % di carico
(valore fabbrica = 0)
0 = DC 0..10 V
1 = DC 2..10 V
2 = DC 0/2..10 V
Configuration of analog output (default value
= 0)
0 = DC 0..10 V
1 = DC 2..10 V
2 = DC 0/2..10 V
OEM / Service
LMV27
xx
ATTENTION: as for SQM3x actuators, set the direction according to the acutator function. As far as SQN1x actuators, set
always the counterclockwise direction, independently from the model chosen for the specific function.