Unigas G400A - Operation Example

M12927CA
SETPOINT AND HYSTERESIS CONFIGURATION (SP, AL1, HAL1 parameters)
Pushthe buttontoenterintothesetpointconfigur ation:
5
SP setpoint value change:
increase decrease
SP
2480
Confirm / Next
AL1
250
A
L1 parameter value change:
increase decrease
Confirm / Next
Back to the first parameter
Confirm / Next
HAL1 parameter value change:
increase decrease
HAL1
250
To return to normal mode, press the key for 3 seconds or wait the 10s timeout
Operation example