Unigas G400A - 5 • “EASY” PROGRAMMING and CONFIGURATION; • Prot; • Lin

5 • “EASY” PROGRAMMING and CONFIGURATION
• Prot
Pro
Protection code
Prot Display Modification
0 SP, Hy.P, Hy.n SP, Hy.P , Hy.n
1 SP, Hy.P, Hy.n SP
2 SP
+ 4 to disable InP, Out
+ 8 to disable CFG
THE EASY CONFIGURATION (Pro=0...12) IS SUITABLE FOR
VERSIONS WITH AL1/OPEN/CLOSED
PAS = 99
Pro
PAS
Password
Protection code
S4 Jumper
(CPU)
ON
-
SP
P.V. / S.V.
P.V. / S.V. Process variable
(PV display) Work Setpoint (SV
display) or control output value with
controller in manual
Local Setpoint
(scale points Lo.L...Hi.L)
LEVEL 1 MENU
Positive hysteresis alarm 1
(0 ... +999 scale points)
Negative hysteresis alarm 1
(0 ... -999 scale points)
Ay.P
Ay.n
12
6 • PROGRAMMING and CONFIGURATION
If Inc, Dec, F keys are not pressed within 15 sec, display returns
automatically to P.V. value.
N.B.: Once a particular configuration is entered, all unnecessary parameters are no longer displayed
INF
InP
Out
PAS = 99
Pro
Lin
Input settings
Output settings
Hardware configuration
Input linearization
NO
Keep the F key
pressed to scroll
the menus
Release the F
key to select the
displayed menu
Press the F key
to access the
parameters
Keep the F key
pressed to exit any
menu
Keep F + Auto/Man
keys pressed for 2
sec. on any menu
to go immediately
to level 1 display
Pressing the Auto/
Man + F keys
on any menu
immediately returns
you to the previous
parameter.
S4 Jumper
(CPU) = ON
PAS
NO
Hrd
U.CA
Custom menu
Password
User calibration
Protection code
Information display
CFG
(*) The automatic return PV/SV display is disabled for these displays
P.oS
0V.P
sp
P.V. / S.V.
P.V. / S.V.
Process variable (PV display)
Work Setpoint (SV display) or control
output value with controller in manual
Valve position indication
(0.0 ... 100.0 %)
Control output value
Local Setpoint
(Lo.L ... Hi.L)
LEVEL 1 MENU
Positive hysteresis alarm 1
(0 ... +999 scale points)
Negative hysteresis alarm 1
(0 ... +999 scale points)
-
(*)
Ay.n
Ay.P
80.0
+5.0
-5.0
(*)
380379_MHW_600V-T73_06-2012_ENG