Unilumin ULW III User Manual

Chapter 4 LED Display Playing Setting
42
4.1.2.2 Startup Setting
On the main window of the software, click Setting > Start Setting to enable the
software to run automatically upon startup of the PC and to automatically activate a
playing solution. See Fig 4-4:
Fig 4-4 Startup Setting
Auto Run after Power-on: If you enable this function, UniStudio will run
automatically the next time when the PC is started.
Restart Software on Time: If you enable this function, set the restart interval and
time, and click OK, UniStudio will be automatically restarted after the PC time reaches
the preset restart time. After the software is restarted, the window information and
playing status before restart will be automatically recovered.
Exit of software on time: If you enable this function and set the exit time, the
software will exit automatically upon the preset time. This function can prevent
damages to the uploaded data caused by forcible exit of the software.

Unilumin ULW III Specifications

General

Brand	Unilumin
Model	ULW III
Category	Monitor
Language	English