Unilumin ULW III User Manual

Chapter 3 LED Display Control Setting
35
3.3.4.2 Setting Coefficients for a New Module
1） Select Position of the New Module: Select Topology or List. Then select the
position of the receiving card where the new module is located. Double click the
selected position:
Fig 3-21 Selecting Cabinet for the New Module
2） Choose Display Mode to Modules. Select the position of the new module and
click Next.
Fig 3-22 Selecting Position of New Module

Unilumin ULW III Specifications

General

Brand	Unilumin
Model	ULW III
Category	Monitor
Language	English