Unitech K2724 - Code ID Setting (Example); Preamble, Postamble, and Output Sequence

* Scan Exit to end setup
3.2.3. Code ID Setting (example)
The following example shows how to set Code 93 with ID O and Code 128 without
ID
* Scan Enter Group 3
* Scan D2 to select Code ID
* Scan 1 for “Yes”
* Scan D3 to define IDs
* Scan 0 and 9 for selecting Code 93
* Scan O from Full ASCII Table (Appendix D) for new ID
* Scan 0 and “8” to select Code 128
* Scan NULL character from ASCII Table (Appendix D) for none ID
* Scan Exit to end setup
3.2.4. Preamble, Postamble, and Output Sequence
Setting of Output Sequence is the same procedure as setting preamble and postamble.
The Following is an example to set STX as preamble and ETX as postamble for the
scanner port:
* Scan Enter Group 3
* Scan PP to start preamble setting
* Scan STX character from Full ASCII Table
* Scan PP to end preamble setting
* Scan OO to start postamble setting
* Scan ETX from Full ASCII Table
* Scan OO to end postamble setting
* Scan Exit to end setup
The next example shows set track 1 output sequence as:
Account Number<Enter>
Expiration Month/Expiration Year<Enter>
* Scan Enter Group 4
* Scan E1 to select Terminator
* Scan 1 for None
* Scan “PP” to start track output sequence setting
* Scan 1 to select account number
* Scan CR from Full ASCII table
* Scan 5 for expiration month
* Scan / from Full ASCII table