* China Postal Code (Toshiba Code).
* Codabar.
* UCC/EAN128
* Code 32 (Italian pharmacy).
* Code 93.
* Code 128.
* Label Code IV and V
* Delta Distance Code.
1.2.2. Magnetic Stripe:
* Track 1 – IATA.
* Track 2 – ABA.
* Track 3 – THRIFT.
1.3. Scanning Mode:
The keyboard provides seven scanning modes for CCD/Laser scanners:
* Trigger Mode:
Depressing the scanner’s trigger to activate the scanner and automatically turn
off the scanner after successful label read. Releasing the trigger will manually
de-activate the scanner.
* Flash Mode:
The Keyboard triggers the scanner to scan periodically - providing a trigger-less
scanning method. The scanner will strobe on and off until a label is detected.
Note – this feature may not work properly with older laser scanners.
* Multiscan:
The scanner’s trigger is held down during the reading of multiple labels - and the
scanner is turned off when trigger is released.
* One Press, One Scan:
The scanner’s trigger is pressed once and the scanner remains on until a
successful input.
* Test Mode:
The scanner’s trigger is pressed once and the scanner remains on to read
whatever label is presented and then sent to computer.
* Old Laser Flash Mode:
This feature is designed to work with older laser scanners. Some models may
not work properly with this feature.
* Continuous Mode:
The scanner’s trigger is pressed once and scanner remains on to read a label only
once. Subsequent presentations of the same label will be ignored.
To Next Page
Loading...