Contents
1. Overview Page 1
1.1. Ports and Input Device 2
1.2. Decoding Capability 2
1.2.1. Bar Code 2
1.2.2. Magnetic Stripe 3
1.3. Scanning Mode 3
1.4. Setup 4
2. Understanding the Operation Parameters 4
2.1. Intercharacter Delay 4
2.2. Function Code 5
2.3. Caps-Lock 5
2.4. Alt Key Mode 5
2.5. Code ID 5
2.6. Scanning Mode 6
2.7. Track 1 Output Sequence 7
2.8. Track 2 Output Sequence 8
2.9. Fix Length of 2 of 5 Codes 8
2.10. CLSI Format of Code bar 9
2.11. Zero Expansion of UPC-E 9
2.12. Bookland EAN 9
3. Setup 9
3.1. Setup from Keyboard (for DOS environment) 9
3.2. Setup the Keyboard from Bar Code Menu 10
3.2.1. General Settings 10
3.2.2. Bar Code Length Setting (example) 10
3.2.3. Code ID Setting (example) 11
3.2.4. Preamble, Postamble, and Output Sequence 11
3.3. Data Editing 12
3.4. Batch Setup 20
3.5. Scanner Configuration Manager Software 21
4. Using the Magnetic Stripe Card Reader 22
5. Pin assignment of the scanner port 22
6. Specification 23
Appendix A. – Function Codes
Appendix B. – Setup Menu
Appendix C. – Full ACPI Chart
Appendix D. – Bar Code Test Chart
To Next Page
Loading...
Need help?
General
