A check digit is optional for Standard 25 and can be
added as the last digit. It is a calculated value used to
verify the integrity of the data.
Disable: The scanner transmits Standard 25 barcodes as
is.
Do Not Transmit Check Digit After Verification: The
scanner checks the integrity of all Standard 25
barcodes to verify that the data complies with the
check digit algorithm. Barcodes passing the check will
be transmitted except the last digit, whereas those
failing it will not be transmitted.
Transmit Check Digit After Verification: The scanner
checks the integrity of all Standard 25 barcodes
to verify that the data complies with the check digit
algorithm .Barcodes passing the check will be
transmitted, whereas those failing it will not be
transmitted.
W0C7300
W0C7304
*Disable
Do Not Transmit Check Digit
After Verification
To Next Page
Loading...
