Unitech MS836 User Manual

Check digits are optional for Code 11
and can be added as the last one or
two digits, which are calculated
values used to verify the integrity of
the data.
If the Disable option is enabled,
the scanner transmits Code 11
barcodes as is.
W0C7900
Disable
W0C7904
W0C7908
*One Check Digit,MOD10
Two Check Digits,
MOD10/MOD10
W0C790C
Two Check Digits,
MOD10/MOD11

Unitech MS836 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Scanner type	1D
Read rate (max)	100 reads/s
Maximum scan area	220 x 250 mm
Maximum scan width	220 mm
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), Interleaved 2 of 5, MSI, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Power consumption	85 mA
Buzzer	Yes
Certification	CE, FCC
Product color	Black
Housing material	Plastic
International Protection (IP) code	IP42
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	5 - 85 %

Weight and Dimensions

Depth	95 mm
Width	70 mm
Height	160 mm
Weight	150 g