Unitech MS836 User Manual

Check digits are optional for Plessey and can be
added as the last one or two digits, which are
calculated values used to verify the integrity of the
data.
Disable: The scanner transmits Plesseybarcodes as
is.
Do Not Transmit Check Digit After Verification:
The scanner checks the integrity of all Plessey
barcodes to verify that the data complies with the
check digit algorithm. Barcodes passing the
checks will be transmitted except the last two
digits, whereas those failing them will not be
transmitted.
Transmit Check Digit After Verification: The
scanner checks the integrity of all Plessey
barcodes to verify that the data complies with the
check digit algorithm. Barcodes passing the
checks will be transmitted, whereas those failing
them will not be transmitted.
Disable
W0C7800
W0C7804
*Do Not Transmit Check Digit
After Verification
W0C780C
Transmit Check Digit
After Verification

Unitech MS836 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Scanner type	1D
Read rate (max)	100 reads/s
Maximum scan area	220 x 250 mm
Maximum scan width	220 mm
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), Interleaved 2 of 5, MSI, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Power consumption	85 mA
Buzzer	Yes
Certification	CE, FCC
Product color	Black
Housing material	Plastic
International Protection (IP) code	IP42
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	5 - 85 %

Weight and Dimensions

Depth	95 mm
Width	70 mm
Height	160 mm
Weight	150 g