Unitech PA500 User Guide

35
Bluetooth Connection
Your device is equipped with Bluetooth wireless technology that you can
use to synchronize information with a computer equipped with a Bluetooth
adapter or access point. Bluetooth wireless technology allows you to
communicate with the computer whenever it is within range.
1 Perform the steps below on your computer.
(1) On the Windows taskbar, click Start > Settings > Control Panel >
Bluetooth Devices.
(2) Click the Options tab, select the “Turn discovery on” and “Allow
Bluetooth devices to connect to this computer’s” options.
(3) On the COM port tab, click Add.
(4) Select “Incoming (device initiates the connection)”, then click OK.
Note the number of COM port that was added. The COM port
must not be higher than 20.
(5) In the ActiveSync window, click File menu, then Connection
Settings.
(6) Under the “In Allow serial cable or infrared connection to this COM
port” list, select the COM port with the number you noted in
step 3.
(7) Click OK.
2 Perform the steps below on your device.
(1) Enable Bluetooth on your device.
Using Today screen
(a) On the Today screen, tap WiFi.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm